Skip to content

Baxter Fire and EMS Frequencies

Baxter in Jasper County, Iowa has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Newton (Iowa Statewide Interoperable Communications System (ISICS)), about 14 miles away.

About Baxter Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Baxter: Jasper County Fire 154.1900 MHz, narrow FM, 107.2 PL; RF Remote Links Fire 453.3125 MHz, narrow FM, 192.8 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Baxter Fire talkgroup 33701 (hex 83a5).

  • 13 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Baxter, start with the Newton site of Iowa Statewide Interoperable Communications System (ISICS), about 14 miles away. Its control channels: 769.44375, 770.69375, 770.94375 MHz.

Data updated .

Baxter trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Baxter FireBaxter Fireground3370183a5T

Jasper County channels that also cover Baxter

Fire Dispatch

Fire Dispatch frequencies for Jasper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper County FireJasper County Fire – Dispatch – Baxter154.1900
In 158.7450
107.2 PLFMNWPVC738
Jasper County FireJasper County Fire – Dispatch – Newton – Patched to SARA154.3550
In 159.2475
136.5 PLFMNKD47984
Jasper County FireJasper County Fire – Dispatch – Reasnor/Monroe – Patched to SARA154.4150
In 158.8575
173.8 PLFMNKNCG838
Jasper County FireJasper County Fire – Dispatch – Prairie City – Patched to SARA154.4150
In 158.8575
186.2 PLFMNKNCG838
Jasper County FireJasper County Fire – Dispatch – Sully/Lynnville – Patched to SARA154.4150
In 158.8575
203.5 PLFMNKNCG838
Jasper County FireJasper County Fire – Dispatch – Kellogg154.4150
In 158.8575
162.2 PLFMNKNCG838
Jasper County FireJasper County Fire – Dispatch – Colfax/Mingo – Patched to SARA156.1575
In 151.4225
151.4 PLFMNWQOE321
RF Remote Links FireRemote Relay for Fire Dispatch – Monroe Tower453.3125192.8 PLFMNWQIT353
RF Remote Links FireRemote Relay for Fire Dispatch – Prairie City Tower453.3125173.8 PLFMNWQIT353
RF Remote Links FireRemote Relay for Fire Dispatch – Sully Tower453.3125203.5 PLFMNWQIT353
RF Remote Links FireRemote Relay for Fire Dispatch – Kellogg Tower453.3125186.2 PLFMNWQIT353

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Jasper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper County FireJasper County Fire – Fire Ground155.3250107.2 PLFMNKNCG838

Hospitals & Medical

Hospitals & Medical frequencies for Jasper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper County HospitalSkiff Medical Center155.400082.5 PLFMNWQFK217

Nearest trunked radio sites

Distances are measured from the center of Baxter.

Newton · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 69 (hex 45) · NAC 4C1 · about 14 mi away
Control 769.44375, 770.69375, 770.94375
Voice 769.19375
Marshalltown · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 64 (hex 40) · NAC 4C1 · about 17 mi away
Control 773.83125, 774.08125, 774.33125
Voice 773.08125, 773.33125, 773.58125
Site-1 · Iowa State University
Site 1 (hex 1) · about 22 mi away
Control 859.5625, 860.5625
Voice 856.5625, 857.5625, 858.5625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Baxter?

We do not have a fire dispatch channel listed specifically for Baxter. The county-level fire dispatch channels in the same county: Jasper County Fire 154.1900 MHz, narrow FM, 107.2 PL; RF Remote Links Fire 453.3125 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Baxter?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Baxter?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Baxter?

For Baxter, start with the Newton site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.44375, 770.69375, 770.94375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Baxter fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Baxter are marked encrypted.