About Humboldt County Fire and EMS Frequencies
Quick answer: Fire dispatch for Humboldt County: Humboldt County Fire 154.4300 MHz, FM, 136.5 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Humboldt County Fire talkgroup 32709 (hex 7fc5).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Humboldt County, start with the Humboldt site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 770.90625, 774.53125, 774.78125 MHz.
Data updated .
Humboldt County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Humboldt County Fire | Fire/EMS Dispatch | 154.4300 In 158.9400 | 136.5 PL | FM | WQAG797 |
Humboldt County trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Humboldt County Fire | County Fire Operations | 32709 | 7fc5 | T |
| Humboldt County Fire | County Fire | 32707 | 7fc3 | T |
| Humboldt County Fire | County Fire | 32708 | 7fc4 | T |
Radio system sites in Humboldt County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Humboldt County
Common questions
What frequency does the fire department use in Humboldt County?
Fire dispatch channels listed for Humboldt County: Humboldt County Fire 154.4300 MHz, FM, 136.5 PL.
Do fire departments and EMS use a trunked radio system in Humboldt County?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Humboldt County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Humboldt County?
For Humboldt County, start with the Humboldt site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 770.90625, 774.53125, 774.78125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Humboldt County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Humboldt County are marked encrypted.
Are Humboldt County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Humboldt County are marked encrypted.