About Bode Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bode: Humboldt County Fire 154.4300 MHz, FM, 136.5 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Bode Fire talkgroup 32730 (hex 7fda).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup; Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bode, start with the Bradgate site of Iowa Statewide Interoperable Communications System (ISICS), about 7 miles away. Its control channels: 769.96875, 770.21875, 770.46875 MHz.
Data updated .
Bode trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Bode Fire | Bode Fire / First Responder Dispatch | 32730 | 7fda | T |
Humboldt County channels that also cover Bode
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Humboldt County Fire | Fire/EMS Dispatch | 154.4300 In 158.9400 | 136.5 PL | FM | WQAG797 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Humboldt County Fire | County Fire Operations | 32709 | 7fc5 | T |
| Humboldt County Fire | County Fire | 32707 | 7fc3 | T |
| Humboldt County Fire | County Fire | 32708 | 7fc4 | T |
Nearest trunked radio sites
Distances are measured from the center of Bode.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bode?
We do not have a fire dispatch channel listed specifically for Bode. The county-level fire dispatch channels in the same county: Humboldt County Fire 154.4300 MHz, FM, 136.5 PL.
Do fire departments and EMS use a trunked radio system in Bode?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bode?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bode?
For Bode, start with the Bradgate site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.96875, 770.21875, 770.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Bode fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Bode are marked encrypted.