Skip to content

Howard County Fire and EMS Frequencies

Howard County in Iowa has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Howard County Fire and EMS Frequencies

Quick answer: Fire dispatch for Howard County: Howard County Fire 154.4000 MHz, FM, 445 DPL. EMS dispatch for Howard County: Howard County EMS 159.4425 MHz, narrow FM, 532 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Howard County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Howard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Howard County FireHoward County Fire – Dispatch154.4000
In 153.8900
445 DPLFMKDW967

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Howard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Howard County FireFire Scene159.0000445 DPLFMNWQMN376
Howard County FireFire Scene159.1950445 DPLFMNWQMN376

EMS Dispatch

EMS Dispatch frequencies for Howard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Howard County EMSHoward County EMS – Dispatch159.4425
In 153.9125
532 DPLFMNWQNG447

Radio system sites in Howard County

Program the control channel first; your scanner finds the voice channels from it.

Lourdes · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 59 (hex 3B) · NAC 4C3
Control 769.94375, 770.19375, 770.44375
Voice 769.19375, 769.69375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Howard County

Common questions

What frequency does the fire department use in Howard County?

Fire dispatch channels listed for Howard County: Howard County Fire 154.4000 MHz, FM, 445 DPL.

What frequency does EMS or the ambulance service use in Howard County?

EMS dispatch channels listed for Howard County: Howard County EMS 159.4425 MHz, narrow FM, 532 DPL.

What scanner do I need to listen to fire and EMS in Howard County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Howard County?

For Howard County, start with the Lourdes site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.94375, 770.19375, 770.44375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Howard County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Howard County are marked encrypted.