Skip to content

Dunlap Fire and EMS Frequencies

Dunlap in Harrison County, Iowa has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Woodbine (Iowa Statewide Interoperable Communications System (ISICS)), about 7 miles away.

Dunlap also extends into Crawford County.

About Dunlap Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Dunlap: Harrison County Fire 154.3700 MHz, narrow FM, 141.3 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Dunlap Fire talkgroup 31801 (hex 7c39).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup; Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dunlap, start with the Woodbine site of Iowa Statewide Interoperable Communications System (ISICS), about 7 miles away. Its control channels: 772.39375, 772.94375, 774.13125 MHz.

Data updated .

Dunlap trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Dunlap FireDunlap Fire/Rescue Paging318017c39T

Harrison County channels that also cover Dunlap

Fire Dispatch

Fire Dispatch frequencies for Harrison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harrison County FireHarrison County Fire – Dispatch154.3700141.3 PLFMNWZW935

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Harrison County FireFire Operations319247cb4T

Nearest trunked radio sites

Distances are measured from the center of Dunlap.

Woodbine · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 141 (hex 8D) · NAC 4C0 · about 7 mi away
Control 772.39375, 772.94375, 774.13125
Voice 770.95625
Harlan · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 80 (hex 50) · NAC 4C2 · about 16 mi away
Control 769.91875, 770.16875, 770.41875
Voice 769.66875
Denison · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 28 (hex 1C) · NAC 4C1 · about 17 mi away
Control 773.80625, 774.05625, 774.30625
Voice 773.05625, 773.30625, 773.55625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Dunlap?

We do not have a fire dispatch channel listed specifically for Dunlap. The county-level fire dispatch channels in the same county: Harrison County Fire 154.3700 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Dunlap?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Dunlap?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Dunlap?

For Dunlap, start with the Woodbine site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 772.39375, 772.94375, 774.13125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dunlap fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Dunlap are marked encrypted.