Skip to content

Crawford County Fire and EMS Frequencies

Crawford County in Iowa has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 13 cities and communities below for local fire departments and EMS agencies.

About Crawford County Fire and EMS Frequencies

Quick answer: Fire dispatch for Crawford County: Crawford County Fire 154.1600 MHz, narrow FM, CSQ. EMS dispatch for Crawford County: Crawford County EMS 151.2875 MHz, narrow FM, 136.5 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Crawford County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Crawford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crawford County FireFir/EMS; Tone-Outs/Dispatch154.1600CSQFMNKNJZ545
Crawford County FireCrawford County Fire – Dispatch155.6250
In 159.4125
203.5 PLFMNWRAE585

Fire Talk-around

Fire Talk-around frequencies for Crawford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crawford County FireFire/EMS talkaround151.0325FMNWRAE585

EMS Dispatch

EMS Dispatch frequencies for Crawford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crawford County EMSCrawford County EMS – Dispatch151.2875136.5 PLFMNWRAE585

Radio system sites in Crawford County

Program the control channel first; your scanner finds the voice channels from it.

Denison · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 28 (hex 1C) · NAC 4C1
Control 773.80625, 774.05625, 774.30625
Voice 773.05625, 773.30625, 773.55625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Crawford County

Common questions

What frequency does the fire department use in Crawford County?

Fire dispatch channels listed for Crawford County: Crawford County Fire 154.1600 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Crawford County?

EMS dispatch channels listed for Crawford County: Crawford County EMS 151.2875 MHz, narrow FM, 136.5 PL.

What scanner do I need to listen to fire and EMS in Crawford County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Crawford County?

For Crawford County, start with the Denison site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.80625, 774.05625, 774.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Crawford County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Crawford County are marked encrypted.