Skip to content

Cherokee County Fire and EMS Frequencies

Cherokee County in Iowa has 3 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Cherokee County Fire and EMS Frequencies

Quick answer: Fire dispatch for Cherokee County: Cherokee County Fire 154.4000 MHz, FM, no tone; Remote RF Links Fire 452.8750 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Cherokee County Fire talkgroup 22306 (hex 5722).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cherokee County, start with the Cherokee site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 774.03125, 774.28125, 774.78125 MHz.

Data updated .

Cherokee County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Cherokee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cherokee County FireCherokee County Fire – Dispatch154.4000FMWPUR754
Remote RF Links FireFire Link452.8750
In 457.8750
FMWNYV773
Remote RF Links FireFire Link453.7500
In 458.7500
FMWPUR754

Cherokee County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Cherokee County FireDispatch Patch – 154.400223065722T
Cherokee County EMSEMS Paging22303571fT
Cherokee County EMSDispatch Patch223075723T
Cherokee County EMSRegional EMS223085724T
Cherokee County EMSCherokee County EMS – Tactical Channel223205730T

Radio system sites in Cherokee County

Program the control channel first; your scanner finds the voice channels from it.

Cherokee · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 22 (hex 16) · NAC 4C3
Control 774.03125, 774.28125, 774.78125
Voice 773.03125, 773.28125, 773.53125, 773.78125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Cherokee County

Common questions

What frequency does the fire department use in Cherokee County?

Fire dispatch channels listed for Cherokee County: Cherokee County Fire 154.4000 MHz, FM, no tone; Remote RF Links Fire 452.8750 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in Cherokee County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cherokee County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cherokee County?

For Cherokee County, start with the Cherokee site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 774.03125, 774.28125, 774.78125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Cherokee County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Cherokee County are marked encrypted.

Are Cherokee County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Cherokee County are marked encrypted.