About Marcus Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Marcus: Cherokee County Fire 154.4000 MHz, FM, no tone; Remote RF Links Fire 452.8750 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Cherokee County Fire talkgroup 22306 (hex 5722).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Marcus, start with the Cherokee site of Iowa Statewide Interoperable Communications System (ISICS), about 8 miles away. Its control channels: 774.03125, 774.28125, 774.78125 MHz.
Data updated .
Cherokee County channels that also cover Marcus
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cherokee County Fire | Cherokee County Fire – Dispatch | 154.4000 | FM | WPUR754 | |
| Remote RF Links Fire | Fire Link | 452.8750 In 457.8750 | FM | WNYV773 | |
| Remote RF Links Fire | Fire Link | 453.7500 In 458.7500 | FM | WPUR754 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Cherokee County Fire | Dispatch Patch – 154.400 | 22306 | 5722 | T |
| Cherokee County EMS | EMS Paging | 22303 | 571f | T |
| Cherokee County EMS | Dispatch Patch | 22307 | 5723 | T |
| Cherokee County EMS | Regional EMS | 22308 | 5724 | T |
| Cherokee County EMS | Cherokee County EMS – Tactical Channel | 22320 | 5730 | T |
Nearest trunked radio sites
Distances are measured from the center of Marcus.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Marcus?
We do not have a fire dispatch channel listed specifically for Marcus. The county-level fire dispatch channels in the same county: Cherokee County Fire 154.4000 MHz, FM, no tone; Remote RF Links Fire 452.8750 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Marcus?
Yes. The county-level systems that cover Marcus are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Marcus?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Marcus?
For Marcus, start with the Cherokee site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 774.03125, 774.28125, 774.78125 MHz. Program a control channel first; the scanner finds the voice channels from it.