About Bremer County Fire and EMS Frequencies
Quick answer: Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Bremer County Fire talkgroup 18909 (hex 49dd).
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bremer County, start with the Sumner site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 773.44375, 773.73125, 774.74375 MHz.
Data updated .
Bremer County trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Bremer County Fire | Fire/EMS Paging | 18909 | 49dd | T |
| Bremer County Fire | Fire Main | 18910 | 49de | T |
| Bremer County EMS | EMS Main | 18911 | 49df | T |
Radio system sites in Bremer County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Bremer County
Common questions
Do fire departments and EMS use a trunked radio system in Bremer County?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bremer County?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bremer County?
For Bremer County, start with the Sumner site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.44375, 773.73125, 774.74375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Bremer County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Bremer County are marked encrypted.