Skip to content

Plainfield Fire and EMS Frequencies

We do not have frequencies listed specifically for Plainfield in Bremer County, Iowa yet. Countywide channels for Bremer County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Butler (Iowa Statewide Interoperable Communications System (ISICS)), about 15 miles away.

About Plainfield Fire and EMS Frequencies

Quick answer: Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Bremer County Fire talkgroup 18909 (hex 49dd).

  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Bremer County channels that also cover Plainfield

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Bremer County FireFire/EMS Paging1890949ddT
Bremer County FireFire Main1891049deT
Bremer County EMSEMS Main1891149dfT

Nearest trunked radio sites

Distances are measured from the center of Plainfield.

Butler · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 12 (hex C) · about 15 mi away
Voice 774.34375
BlackHawk/Bremer Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 12 (hex C) · NAC 4C0 · about 16 mi away
Control 773.80625, 774.05625, 774.30625
Voice 773.55625
Chickasaw Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 19 (hex 13) · NAC 4C4 · about 19 mi away
Control 769.96875, 770.21875, 770.46875
Voice 769.71875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Plainfield?

Yes. The county-level systems that cover Plainfield are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Plainfield?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Plainfield?

For Plainfield, start with the BlackHawk/Bremer Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.80625, 774.05625, 774.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.