About Boone County Fire and EMS Frequencies
Quick answer: Fire dispatch for Boone County: Boone County Fire 154.4000 MHz, narrow FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Boone County Fire talkgroup 18506 (hex 484a).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Boone County, start with the Woodward/Ames Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 773.78125, 774.03125, 774.28125 MHz.
Data updated .
Boone County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Boone County Fire | Boone County Fire – Dispatch | 154.4000 In 159.0150 | CSQ | FMN | WQDL877 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Boone County Hospital | Boone County Hospital | 155.3250 | 110.9 PL | FMN | KJN742 |
Boone County trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Boone County Fire | Fire/EMS Dispatch | 18506 | 484a | T |
| Boone County Fire | Boone County Fire – Tactical Channel | 18526 | 485e | T |
| Boone County Fire | Boone County Fire – Tactical Channel | 18527 | 485f | T |
Radio system sites in Boone County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Boone County
Common questions
What frequency does the fire department use in Boone County?
Fire dispatch channels listed for Boone County: Boone County Fire 154.4000 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Boone County?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Boone County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Boone County?
For Boone County, start with the Woodward/Ames Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.78125, 774.03125, 774.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Boone County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Boone County are marked encrypted.
Are Boone County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Boone County are marked encrypted.