Skip to content

Adams County Fire and EMS Frequencies

Adams County in Iowa has 1 countywide conventional frequency and 3 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Adams County Fire and EMS Frequencies

Quick answer: Fire dispatch for Adams County: Adams County Fire 155.8650 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Adams County Fire talkgroup 15203 (hex 3b63).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Adams County, start with the Corning site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 773.80625, 774.05625, 774.30625 MHz.

Data updated .

Adams County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County FireAdams County Fire – Dispatch155.8650FMKKD523

Adams County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Adams County FireFire Operations152033b63T
Adams County FireAdams County Fire – Dispatch152043b64T
Adams County FireAdams County Fire – Tactical Channel152053b65T

Radio system sites in Adams County

Program the control channel first; your scanner finds the voice channels from it.

Corning · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 3 (hex 3) · NAC 4C3
Control 773.80625, 774.05625, 774.30625
Voice 773.55625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Adams County

Common questions

What frequency does the fire department use in Adams County?

Fire dispatch channels listed for Adams County: Adams County Fire 155.8650 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in Adams County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Adams County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Adams County?

For Adams County, start with the Corning site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.80625, 774.05625, 774.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Adams County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Adams County are marked encrypted.

Are Adams County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Adams County are marked encrypted.