About Pike County Fire and EMS Frequencies
Quick answer: Fire dispatch for Pike County: Pike Co Fire/EMS - Dispatch 151.3700 MHz, narrow FM, 82.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Pike County Fire talkgroup 21587 (hex 5453).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pike County, start with the Petersburg site of Indiana Project Hoosier SAFE-T. Its control channels: 852.975, 853.475 MHz.
Data updated .
Pike County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike Co Fire/EMS - Dispatch | Pike Co Fire/EMS – Dispatch | 151.3700 | 82.5 PL | FMN | WNUK817 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson Twp Fire - Operations | Jefferson Twp Fire – Operations | 154.3400 | 85.4 PL | FMN | KNBY316 |
| Jefferson Twp Fire - Operations | Jefferson Twp Fire – Operations (Digital) | 154.3400 | NXDN48 | KNBY316 | |
| Lockhart Twp Fire - Operations | Lockhart Twp Fire – Operations | 154.2350 | 118.8 PL | FMN | WNZZ251 |
| Patoka Twp Fire - Operations | Patoka Twp Fire – Operations | 154.2500 In 158.9250 | 179.9 PL | FMN | WPMA459 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike Co EMS - Operations | Pike Co EMS – Operations | 154.0400 | 82.5 PL | FMN | KUN492 |
Pike County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pike County Fire | Pike County Fire – Dispatch | 21587 | 5453 | D |
| Pike County Fire | Pike County Fire – Fire Ground | 21588 | 5454 | D |
| Pike County Fire | Pike County Fire – Fire Ground | 21589 | 5455 | D |
| Pike County Fire | Pike County Fire – Fire Ground | 21590 | 5456 | D |
| Pike County EMS | Pike County EMS – Dispatch | 21585 | 5451 | D |
| Pike County EMS | Pike County EMS – Tactical Channel | 21586 | 5452 | D |
Radio system sites in Pike County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Pike County
- Alford
- Algiers
- Arda
- Arthur
- Ashby Yards
- Augusta
- Ayrshire
- Bowman
- Campbelltown
- Cato
- Chandler
- Clay
- Coats Spring
- Coe
- Enos Corner
- Fritz Corner
- Glezen
- Hartwell
- Highbank Town
- Iva
- Jefferson
- Littles
- Lockhart
- Logan
- Madison
- Marion
- Marysville
- Monroe
- Muren
- Oakland City Junction
- Oatsville
- Otwell
- Patoka
- Petersburg
- Pikeville
- Rogers
- Rumble
- Scottsburg
- Spurgeon
- Stendal
- Survant
- Union
- Velpen
- Washington
- West Petersburg
- White Sulphur Springs
- Whiteoak
- Willisville
- Winslow
Common questions
What frequency does the fire department use in Pike County?
Fire dispatch channels listed for Pike County: Pike Co Fire/EMS - Dispatch 151.3700 MHz, narrow FM, 82.5 PL.
Do fire departments and EMS use a trunked radio system in Pike County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pike County?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pike County?
For Pike County, start with the Petersburg site of Indiana Project Hoosier SAFE-T. Its control channels are 852.975, 853.475 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Pike County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Pike County are marked encrypted.
Are Pike County fire and EMS talkgroups encrypted?
None of the 6 talkgroups listed for Pike County are marked encrypted.