Skip to content

Union Fire and EMS Frequencies

We do not have frequencies listed specifically for Union in Pike County, Indiana yet. Countywide channels for Pike County that may also cover this area are shown below when we have them.

About Union Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Union: Pike Co Fire/EMS - Dispatch 151.3700 MHz, narrow FM, 82.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Pike County Fire talkgroup 21587 (hex 5453).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Pike County channels that also cover Union

Fire Dispatch

Fire Dispatch frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike Co Fire/EMS - DispatchPike Co Fire/EMS – Dispatch151.370082.5 PLFMNWNUK817

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson Twp Fire - OperationsJefferson Twp Fire – Operations154.340085.4 PLFMNKNBY316
Jefferson Twp Fire - OperationsJefferson Twp Fire – Operations (Digital)154.3400NXDN48KNBY316
Lockhart Twp Fire - OperationsLockhart Twp Fire – Operations154.2350118.8 PLFMNWNZZ251
Patoka Twp Fire - OperationsPatoka Twp Fire – Operations154.2500
In 158.9250
179.9 PLFMNWPMA459

EMS Tactical

EMS Tactical frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike Co EMS - OperationsPike Co EMS – Operations154.040082.5 PLFMNKUN492

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Pike County FirePike County Fire – Dispatch215875453D
Pike County FirePike County Fire – Fire Ground215885454D
Pike County FirePike County Fire – Fire Ground215895455D
Pike County FirePike County Fire – Fire Ground215905456D
Pike County EMSPike County EMS – Dispatch215855451D
Pike County EMSPike County EMS – Tactical Channel215865452D

Common questions

What frequency does the fire department use in Union?

We do not have a fire dispatch channel listed specifically for Union. The county-level fire dispatch channels in the same county: Pike Co Fire/EMS - Dispatch 151.3700 MHz, narrow FM, 82.5 PL.

Do fire departments and EMS use a trunked radio system in Union?

Yes. The county-level systems that cover Union are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Union?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.