About Noble County Police Frequencies
Quick answer: Dispatch for Noble County: Noble County Sheriff 154.7400 MHz, narrow FM, 103.5 PL (backup). Trunked: Indiana Project Hoosier SAFE-T, for example Noble County Sheriff talkgroup 12092 (hex 2f3c).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Noble County, start with the Kendallville site of Indiana Project Hoosier SAFE-T. Its control channels: 853.9875, 857.2625 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Noble County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Noble County Sheriff Backup | Noble County Sheriff – Dispatch | 154.7400 In 156.0900 | 103.5 PL | FMN | KSB697 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Noble County Sheriff | County Jail | 156.2400 | NXDN48 | KSB697 |
Noble County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Noble County Sheriff | Noble County Sheriff – Dispatch | 12092 | 2f3c | D |
| Noble County Sheriff | Towns Police – Dispatch 1 – Kendallville | 12093 | 2f3d | D |
| Noble County Sheriff | Towns Police – Dispatch 2 – Albion, Avilla, Cromwell, Rome City | 12095 | 2f3f | D |
| Noble County Sheriff | Operations | 12096 | 2f40 | D |
| Noble County Sheriff | Operations | 12098 | 2f42 | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Noble County Sheriff | Operations | 12097 | 2f41 | D Encrypted |
Radio system sites in Noble County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Noble County
- Albion
- Allen
- Ari
- Avilla
- Bakertown
- Bear Lake
- Brimfield
- Burr Oak
- Cosperville
- Cromwell
- Egans Point
- Ege
- Elkhart
- Green
- Green Center
- Grismore
- Indian Village
- Jefferson
- Kendallville
- Kimmell
- LaOtto
- Ligonier
- Lisbon
- Merriam
- Noble
- Orange
- Ormas
- Perry
- Port Mitchell
- Rome City
- Sparta
- Swan
- Wakeville Village
- Washington
- Washington Center
- Wawaka
- Wayne
- Wayne Center
- Wilmot
- Wolcottville
- Wolf Lake
- York
Common questions
What frequency do the police use in Noble County?
Dispatch channels listed for Noble County: Noble County Sheriff 154.7400 MHz, narrow FM, 103.5 PL (backup).
What is the sheriff's dispatch frequency in Noble County?
Noble County Sheriff 154.7400 MHz, narrow FM, 103.5 PL (backup).
Do the police use a trunked radio system in Noble County?
Yes. Law-enforcement talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Noble County?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Noble County?
For Noble County, start with the Kendallville site of Indiana Project Hoosier SAFE-T. Its control channels are 853.9875, 857.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Noble County police frequencies encrypted?
None of the 2 conventional frequencies listed for Noble County are marked encrypted.
Are Noble County police talkgroups encrypted?
1 of the 6 talkgroups listed for Noble County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.