About Noble County Fire and EMS Frequencies
Quick answer: Fire dispatch for Noble County: Noble County Fire 154.2200 MHz, narrow FM, 97.4 PL. EMS dispatch for Noble County: Noble County EMS 155.3250 MHz, narrow FM, 91.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Noble County Fire talkgroup 12100 (hex 2f44).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Noble County, start with the Kendallville site of Indiana Project Hoosier SAFE-T. Its control channels: 853.9875, 857.2625 MHz.
Data updated .
Noble County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Noble County Fire | Noble County Fire – Dispatch | 154.2200 | 97.4 PL | FMN | KLO448 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Noble County EMS | Noble County EMS – Dispatch | 155.3250 In 159.3700 | 91.5 PL | FMN | WPZN654 |
Noble County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Noble County Fire | Noble County Fire – Dispatch (County) | 12100 | 2f44 | D |
| Noble County Fire | Noble County Fire – Operations East (County) | 12101 | 2f45 | D |
| Noble County Fire | Noble County Fire – Operations West (County) | 12102 | 2f46 | D |
Radio system sites in Noble County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Noble County
- Albion
- Allen
- Ari
- Avilla
- Bakertown
- Bear Lake
- Brimfield
- Burr Oak
- Cosperville
- Cromwell
- Egans Point
- Ege
- Elkhart
- Green
- Green Center
- Grismore
- Indian Village
- Jefferson
- Kendallville
- Kimmell
- LaOtto
- Ligonier
- Lisbon
- Merriam
- Noble
- Orange
- Ormas
- Perry
- Port Mitchell
- Rome City
- Sparta
- Swan
- Wakeville Village
- Washington
- Washington Center
- Wawaka
- Wayne
- Wayne Center
- Wilmot
- Wolcottville
- Wolf Lake
- York
Common questions
What frequency does the fire department use in Noble County?
Fire dispatch channels listed for Noble County: Noble County Fire 154.2200 MHz, narrow FM, 97.4 PL.
What frequency does EMS or the ambulance service use in Noble County?
EMS dispatch channels listed for Noble County: Noble County EMS 155.3250 MHz, narrow FM, 91.5 PL.
Do fire departments and EMS use a trunked radio system in Noble County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Noble County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Noble County?
For Noble County, start with the Kendallville site of Indiana Project Hoosier SAFE-T. Its control channels are 853.9875, 857.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Noble County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Noble County are marked encrypted.
Are Noble County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Noble County are marked encrypted.