Skip to content

Jay County Fire and EMS Frequencies

Jay County in Indiana has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 41 cities and communities below for local fire departments and EMS agencies.

About Jay County Fire and EMS Frequencies

Quick answer: Fire dispatch for Jay County: Jay County Fire/EMS 155.2350 MHz, narrow FM, 131.8 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Jay County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Jay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jay County Fire/EMSCounty Fire Dispatch155.2350
In 150.7750
131.8 PLFMNKSF246

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Jay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jay County Fire/EMSCounty Fireground153.7700FMNKSF246
Jay County Fire/EMSCounty EMA155.0100FMNKXH788

EMS Talk-around

EMS Talk-around frequencies for Jay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jay County Fire/EMSEms Private Channel155.2050131.8 PLFMNKNIE481

Radio system sites in Jay County

Program the control channel first; your scanner finds the voice channels from it.

Redkey · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 23 (hex 17) · NAC 6B3
Control 853.8875, 855.2375
Voice 851.8875, 852.9875, 853.0625, 853.3625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Jay County

Common questions

What frequency does the fire department use in Jay County?

Fire dispatch channels listed for Jay County: Jay County Fire/EMS 155.2350 MHz, narrow FM, 131.8 PL.

What scanner do I need to listen to fire and EMS in Jay County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Jay County?

For Jay County, start with the Redkey site of Indiana Project Hoosier SAFE-T. Its control channels are 853.8875, 855.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Jay County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Jay County are marked encrypted.