Dunkirk also extends into Blackford County.
About Dunkirk Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Dunkirk: Jay County Fire/EMS 155.2350 MHz, narrow FM, 131.8 PL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Dunkirk conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dunkirk Fire | Dunkirk Fire – Fire Ground | 154.1300 | FMN | KVM529 | |
| Dunkirk Fire | Dunkirk Fire – Fireground Repeater | 453.1500 In 458.1500 | FMN | KVM529 |
Jay County channels that also cover Dunkirk
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jay County Fire/EMS | County Fire Dispatch | 155.2350 In 150.7750 | 131.8 PL | FMN | KSF246 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jay County Fire/EMS | County Fireground | 153.7700 | FMN | KSF246 | |
| Jay County Fire/EMS | County EMA | 155.0100 | FMN | KXH788 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jay County Fire/EMS | Ems Private Channel | 155.2050 | 131.8 PL | FMN | KNIE481 |
Nearest trunked radio sites
Distances are measured from the center of Dunkirk.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Dunkirk?
We do not have a fire dispatch channel listed specifically for Dunkirk. The county-level fire dispatch channels in the same county: Jay County Fire/EMS 155.2350 MHz, narrow FM, 131.8 PL.
What scanner do I need to listen to fire and EMS in Dunkirk?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Dunkirk?
For Dunkirk, start with the Redkey site of Indiana Project Hoosier SAFE-T. Its control channels are 853.8875, 855.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Dunkirk fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Dunkirk are marked encrypted.