Dunkirk also extends into Blackford County.
About Dunkirk Police Frequencies
Quick answer: Dispatch for Dunkirk: Dunkirk Police 151.4600 MHz, narrow FM, 311 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example Dunkirk Police talkgroup 10800 (hex 2a30).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 1 talkgroup; Indiana Project Hoosier SAFE-T: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Dunkirk, start with the Redkey site of Indiana Project Hoosier SAFE-T, about 3 miles away. Its control channels: 853.8875, 855.2375 MHz.
Data updated .
Dunkirk conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dunkirk Police | Dunkirk Police Department Dispatch | 151.4600 In 159.2550 | 311 DPL | FMN | KSD564 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dunkirk Police | Dunkirk Police – Tactical Channel | 154.0850 | CSQ | FMN | KUZ923 |
| Dunkirk Police | PLAN A | 155.1300 In 154.8900 | FMN | KSD564 |
Dunkirk trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Dunkirk Police | Dunkirk Police – Dispatch | 10800 | 2a30 | D |
Jay County channels that also cover Dunkirk
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jay County Law Enforcement | Jay County Law Enforcement – Dispatch | 155.3100 In 154.7700 | 131.8 PL | FMN | WNAU890 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jay County Law Enforcement | Jay County Law Enforcement – Tactical Channel | 154.0550 | FMN | WPKS462 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Jay County Sheriff | Jay County Sheriff – Dispatch | 10802 | 2a32 | D |
Nearest trunked radio sites
Distances are measured from the center of Dunkirk.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Dunkirk?
Dispatch channels listed for Dunkirk: Dunkirk Police 151.4600 MHz, narrow FM, 311 DPL.
Do the police use a trunked radio system in Dunkirk?
Yes. Law-enforcement talkgroups are listed for Indiana Project Hoosier SAFE-T: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to police in Dunkirk?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Dunkirk?
For Dunkirk, start with the Redkey site of Indiana Project Hoosier SAFE-T. Its control channels are 853.8875, 855.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Dunkirk police frequencies encrypted?
None of the 3 conventional frequencies listed for Dunkirk are marked encrypted.
Are Dunkirk police talkgroups encrypted?
None of the 1 talkgroups listed for Dunkirk are marked encrypted.