Skip to content

Fulton County Police Frequencies

Fulton County in Indiana has 4 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 14 cities and communities below for local police departments.

About Fulton County Police Frequencies

Quick answer: Trunked: Indiana Project Hoosier SAFE-T, for example Fulton County Sheriff talkgroup 10271 (hex 281f).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Fulton County, start with the Rochester site of Indiana Project Hoosier SAFE-T. Its control channels: 853.4, 855.4875 MHz.

Data updated .

Fulton County conventional frequencies

Dispatch

Dispatch frequencies for Fulton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fulton County Law EnforcementPlan A Car-Car/Base-Car155.1300CSQFMNKSB609
Fulton County Law EnforcementPlan A Car-Base155.1300
In 154.8900
CSQFMNKSB609
Fulton County Law EnforcementSheriff/Police Dispatch (Akron/Kewana/Rochester)155.1900
In 151.2350
146.2 PLFMNKSB609

Jails & Corrections

Jails & Corrections frequencies for Fulton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fulton County Law EnforcementJail154.7325FMNKSB609

Fulton County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Fulton County SheriffFulton County Sheriff – Dispatch10271281fD
Fulton County SheriffFulton County Sheriff – Tactical Channel102722820D
Fulton County SheriffCar-to- Car102642818D
Fulton County SheriffCar-to-Car102652819D

Radio system sites in Fulton County

Program the control channel first; your scanner finds the voice channels from it.

Rochester · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 48 (hex 30) · NAC 6BC
Control 853.4, 855.4875
Voice 851.4, 852.4
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Fulton County

Common questions

Do the police use a trunked radio system in Fulton County?

Yes. Law-enforcement talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Fulton County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Fulton County?

For Fulton County, start with the Rochester site of Indiana Project Hoosier SAFE-T. Its control channels are 853.4, 855.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Fulton County police frequencies encrypted?

None of the 4 conventional frequencies listed for Fulton County are marked encrypted.

Are Fulton County police talkgroups encrypted?

None of the 4 talkgroups listed for Fulton County are marked encrypted.