Skip to content

Fulton County Fire and EMS Frequencies

Fulton County in Indiana has 6 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Fulton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Fulton County: Fulton County Fire/EMS 154.2350 MHz, narrow FM, 103.5 PL. EMS dispatch for Fulton County: Fulton County Fire/EMS 155.2050 MHz, narrow FM, 192.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Fulton County Fire talkgroup 10269 (hex 281d).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Fulton County, start with the Rochester site of Indiana Project Hoosier SAFE-T. Its control channels: 853.4, 855.4875 MHz.

Data updated .

Fulton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Fulton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fulton County Fire/EMSFulton County Fire/EMS – Dispatch (Countywide)154.2350
In 150.7900
103.5 PLFMNKFT462

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Fulton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fulton County Fire/EMSAkron Fire154.3400FM—
Fulton County Fire/EMSKewanna Fire155.7600FMKNJB880
Kewana FireLocal Govt / Fire Tactical155.7600FMNKNJB880

EMS Dispatch

EMS Dispatch frequencies for Fulton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fulton County Fire/EMSParkview Hospital Samaritan155.2050192.8 PLFMNKWS502
Fulton County Fire/EMSLutheran-Fulton Co. EMS Dispatch155.9550
In 151.0400
103.5 PLFMNKDZ745

Fulton County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Fulton County FireFulton County Fire – Dispatch10269281dD
Fulton County FireFulton County Fire – Fire Ground10270281eD
Fulton County EMSFulton County EMS – Dispatch10268281cD
Fulton County EMSFulton County EMS – Operations10267281bD

Radio system sites in Fulton County

Program the control channel first; your scanner finds the voice channels from it.

Rochester · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 48 (hex 30) · NAC 6BC
Control 853.4, 855.4875
Voice 851.4, 852.4
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Fulton County

Common questions

What frequency does the fire department use in Fulton County?

Fire dispatch channels listed for Fulton County: Fulton County Fire/EMS 154.2350 MHz, narrow FM, 103.5 PL.

What frequency does EMS or the ambulance service use in Fulton County?

EMS dispatch channels listed for Fulton County: Fulton County Fire/EMS 155.2050 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Fulton County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Fulton County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Fulton County?

For Fulton County, start with the Rochester site of Indiana Project Hoosier SAFE-T. Its control channels are 853.4, 855.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Fulton County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Fulton County are marked encrypted.

Are Fulton County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Fulton County are marked encrypted.