Skip to content

Oconee Fire and EMS Frequencies

Oconee in Shelby County, Illinois has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Lakewood/Williamsburg Hill (STARCOM21 Statewide Illinois), about 9 miles away.

About Oconee Fire and EMS Frequencies

Quick answer: Fire dispatch for Oconee: Oconee Fire 151.3775 MHz, narrow FM, 67.0 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Oconee conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Oconee
AgencyDescriptionFrequency (MHz)ToneModeFCC
Oconee FireOconee Fire – Repeater151.3775
In 158.8575
67.0 PLFMNWQNA556

Shelby County channels that also cover Oconee

Fire Dispatch

Fire Dispatch frequencies for Shelby County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Shelby County FireShelby County Fire – Fire Ground (Old Countywide Dispatch)154.4300CSQFMN—
Shelby County FireShelby County Fire – Dispatch / Sheriff – Interagency155.5800
In 159.0300
203.5 PLFMNKSB926
Shelby County FireMABAS Division 54159.2775245 DPLFMNWQPE997

Hospitals & Medical

Hospitals & Medical frequencies for Shelby County
AgencyDescriptionFrequency (MHz)ToneModeFCC
HSHS Good Shepherd Hospital (Shelbyville)Patient Reports155.3400FMNKXO701

Nearest trunked radio sites

Distances are measured from the center of Oconee.

Lakewood/Williamsburg Hill · STARCOM21 Statewide Illinois
RFSS 2 · Site 26 (hex 1A) · NAC 148 · about 9 mi away
Control 852.35, 852.875, 853.4
Voice 851.825, 853.975
Taylorville CC · STARCOM21 Statewide Illinois
RFSS 2 · Site 27 (hex 1B) · NAC 142 · about 17 mi away
Control 852.9, 853.425, 857.2125
Voice 852.375, 854.1125, 859.3125, 860.2125
Vandalia · STARCOM21 Statewide Illinois
RFSS 3 · Site 30 (hex 1E) · NAC 14A · about 24 mi away
Control 851.975, 852.8125, 853.3375
Voice 851.45, 853.9125, 854.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Oconee?

Fire dispatch channels listed for Oconee: Oconee Fire 151.3775 MHz, narrow FM, 67.0 PL.

What scanner do I need to listen to fire and EMS in Oconee?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Oconee?

For Oconee, start with the Lakewood/Williamsburg Hill site of STARCOM21 Statewide Illinois. Its control channels are 852.35, 852.875, 853.4 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Oconee fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Oconee are marked encrypted.