Skip to content

Ramsey Fire and EMS Frequencies

Ramsey in Fayette County, Illinois has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Vandalia (STARCOM21 Statewide Illinois), about 14 miles away.

About Ramsey Fire and EMS Frequencies

Quick answer: Fire dispatch for Ramsey: Ramsey Fire 154.4150 MHz, narrow FM, 186.2 PL. Trunked: STARCOM21 Statewide Illinois, for example Fayette County Fire talkgroup 8481 (hex 2121).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ramsey, start with the Vandalia site of STARCOM21 Statewide Illinois, about 14 miles away. Its control channels: 851.975, 852.8125, 853.3375 MHz.

Data updated .

Ramsey conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Ramsey
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ramsey FireRamsey Fire – Dispatch154.4150
In 158.8800
186.2 PLFMNWPPZ892

Fayette County channels that also cover Ramsey

Fire Dispatch

Fire Dispatch frequencies for Fayette County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fayette County FireFayette County Fire – Tone-Outs / Dispatch155.4225
In 151.1075
743 DPLFMNWRTF884
Saint Peter FireSaint Peter Fire – Dispatch154.3250FMNWQFP676

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Fayette County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fayette County FireFayette County Fire – Fire Ground – Countywide (Channel 2)153.9725743 DPLFMNWRWD807
Fayette County FireFayette County Fire – Fire Ground – Countywide (Channel 1)158.9250743 DPLFMNWRWD807
Saint Elmo FireSaint Elmo Fire – Fire Ground154.3250FMNKFX224

Hospitals & Medical

Hospitals & Medical frequencies for Fayette County
AgencyDescriptionFrequency (MHz)ToneModeFCC
SBL Fayette County Hospital (Vandalia)Patient Reports155.3400123.0 PLFMNWRXE825

STARCOM21 Statewide Illinois

STARCOM21 Statewide Illinois talkgroups
AgencyDescriptionTalkgroupHexMode
Fayette County Fire UnconfirmedCounty Fire84812121D

Nearest trunked radio sites

Distances are measured from the center of Ramsey.

Vandalia · STARCOM21 Statewide Illinois
RFSS 3 · Site 30 (hex 1E) · NAC 14A · about 14 mi away
Control 851.975, 852.8125, 853.3375
Voice 851.45, 853.9125, 854.1875
Lakewood/Williamsburg Hill · STARCOM21 Statewide Illinois
RFSS 2 · Site 26 (hex 1A) · NAC 148 · about 15 mi away
Control 852.35, 852.875, 853.4
Voice 851.825, 853.975
Greenville · STARCOM21 Statewide Illinois
RFSS 3 · Site 60 (hex 3C) · NAC 144 · about 23 mi away
Control 851.5875, 852.8, 853.25
Voice 851.125, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ramsey?

Fire dispatch channels listed for Ramsey: Ramsey Fire 154.4150 MHz, narrow FM, 186.2 PL.

Do fire departments and EMS use a trunked radio system in Ramsey?

Yes. The county-level systems that cover Ramsey are Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ramsey?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ramsey?

For Ramsey, start with the Vandalia site of STARCOM21 Statewide Illinois. Its control channels are 851.975, 852.8125, 853.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Ramsey fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Ramsey are marked encrypted.