Skip to content

Shelby County Fire and EMS Frequencies

Shelby County in Illinois has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 29 cities and communities below for local fire departments and EMS agencies.

About Shelby County Fire and EMS Frequencies

Quick answer: Fire dispatch for Shelby County: Shelby County Fire 154.4300 MHz, narrow FM, CSQ.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Shelby County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Shelby County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Shelby County FireShelby County Fire – Fire Ground (Old Countywide Dispatch)154.4300CSQFMN—
Shelby County FireShelby County Fire – Dispatch / Sheriff – Interagency155.5800
In 159.0300
203.5 PLFMNKSB926
Shelby County FireMABAS Division 54159.2775245 DPLFMNWQPE997

Hospitals & Medical

Hospitals & Medical frequencies for Shelby County
AgencyDescriptionFrequency (MHz)ToneModeFCC
HSHS Good Shepherd Hospital (Shelbyville)Patient Reports155.3400FMNKXO701

Radio system sites in Shelby County

Program the control channel first; your scanner finds the voice channels from it.

Lakewood/Williamsburg Hill · STARCOM21 Statewide Illinois
RFSS 2 · Site 26 (hex 1A) · NAC 148
Control 852.35, 852.875, 853.4
Voice 851.825, 853.975
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Shelby County

Common questions

What frequency does the fire department use in Shelby County?

Fire dispatch channels listed for Shelby County: Shelby County Fire 154.4300 MHz, narrow FM, CSQ.

What scanner do I need to listen to fire and EMS in Shelby County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Shelby County?

For Shelby County, start with the Lakewood/Williamsburg Hill site of STARCOM21 Statewide Illinois. Its control channels are 852.35, 852.875, 853.4 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Shelby County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Shelby County are marked encrypted.