About Sparta Fire and EMS Frequencies
Quick answer: Fire dispatch for Sparta: Sparta Fire 453.0500 MHz, narrow FM, no tone.
- 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Sparta conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sparta Fire | Sparta Fire – Dispatch | 453.0500 In 458.0500 | FMN | KNCP311 |
Randolph County channels that also cover Sparta
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Randolph County Fire | Randolph County Fire – Countywide Paging / Dispatch | 156.2400 | 85.4 PL | FMN | WQNY423 |
| Randolph County Fire | Randolph County Fire – Paging – Links to Remote Towers (Ellis Grove) | 453.2000 In 458.2000 | 343 DPL | FMN | WQON422 |
| Randolph County Fire | Remote Link to Perry County 911 Back Up PSAP (Sparta) | 453.6250 | FMN | WPRH418 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| MedStar Ambulance (Sparta) | MedStar Ambulance (Sparta) – Operations (Sparta) | 154.5150 | 88.5 PL | FMN | WPMN541 |
| MedStar Ambulance (Sparta) | MedStar Ambulance (Sparta) – Operations – New (Chester) | 154.8675 In 153.7400 | FMN | WPMN541 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chester Memorial Hospital | Patient Reports | 155.3400 | 167.9 PL | FMN | WRX750 |
| Deaconess Red Bud Regional Hospital | Patient Reports | 155.1600 | 82.5 PL | FMN | WSLU845 |
| Deaconess Red Bud Regional Hospital | Patient Reports | 155.3400 | 82.5 PL | FMN | WSLU845 |
| Sparta Community Hospital | Patient Reports | 155.1600 | 91.5 PL | FMN | KVA233 |
| Sparta Community Hospital | Patient Reports | 155.3400 | 91.5 PL | FMN | KVA233 |
Nearest trunked radio sites
Distances are measured from the center of Sparta.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Sparta?
Fire dispatch channels listed for Sparta: Sparta Fire 453.0500 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Sparta?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Sparta?
For Sparta, start with the Sparta site of STARCOM21 Statewide Illinois. Its control channels are 852.85, 853.375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Sparta fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Sparta are marked encrypted.