Skip to content

Willisville Fire and EMS Frequencies

Willisville in Perry County, Illinois has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Sparta (STARCOM21 Statewide Illinois), about 9 miles away.

About Willisville Fire and EMS Frequencies

Quick answer: Fire dispatch for Willisville: Willisville Fire 154.2200 MHz, narrow FM, 85.4 PL. County-level ems dispatch that covers Willisville: Perry County EMS 155.4000 MHz, narrow FM, 85.4 PL.

  • 12 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Willisville conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Willisville
AgencyDescriptionFrequency (MHz)ToneModeFCC
Willisville FireWillisville Fire – Backup154.220085.4 PLFMNWNSB375
Willisville FireWillisville Fire – Dispatch155.6925
In 158.8950
343 DPLFMNWRFR462

Perry County channels that also cover Willisville

Fire Dispatch

Fire Dispatch frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Perry County FirePerry County Fire – Paging153.770085.4 PLFMNWPKJ493
Perry County Fire911 – DuQuoin Fire154.130085.4 PLFMNWPKJ493
Perry County Fire911 – Future159.3300FMNWPQJ331
Perry County Fire911 Remote Link – Pinckneyville FX2453.4250223 DPLFMNWPRH418
Perry County Fire911 Remote Link – Cutler FX0458.6250131.8 PLFMNWPRH418

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Illinois State Fairgrounds (DuQuoin)Fire Marshal158.7750
In 155.9850
FMNWPDP735
Perry County FirePerry County Fire – Local154.0700FMNWPRS328

EMS Dispatch

EMS Dispatch frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Perry County EMS911 – EMS Paging155.400085.4 PLFMNWPRS328

Hospitals & Medical

Hospitals & Medical frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marshall Browning Hospital (Pinckneyville)Patient Reports155.3400FMNWQIQ943
Pinckneyville Community HospitalPatient Reports155.3400100.0 PLFMNKNBW727

Nearest trunked radio sites

Distances are measured from the center of Willisville.

Sparta · STARCOM21 Statewide Illinois
RFSS 3 · Site 49 (hex 31) · NAC 147 · about 9 mi away
Control 852.85, 853.375
Voice 852.325, 859.2125
Cora · STARCOM21 Statewide Illinois
RFSS 3 · Site 16 (hex 10) · NAC 146 · about 9 mi away
Control 851.35, 851.875, 852.925
Voice 852.4, 853.45, 860.3375
Menard CC - Chester · STARCOM21 Statewide Illinois
RFSS 3 · Site 25 (hex 19) · NAC 140 · about 15 mi away
Control 857.2625, 858.2625, 859.2625, 860.2625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Willisville?

Fire dispatch channels listed for Willisville: Willisville Fire 154.2200 MHz, narrow FM, 85.4 PL.

What frequency does EMS or the ambulance service use in Willisville?

We do not have a EMS dispatch channel listed specifically for Willisville. The county-level EMS dispatch channels in the same county: Perry County EMS 155.4000 MHz, narrow FM, 85.4 PL.

What scanner do I need to listen to fire and EMS in Willisville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Willisville?

For Willisville, start with the Sparta site of STARCOM21 Statewide Illinois. Its control channels are 852.85, 853.375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Willisville fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Willisville are marked encrypted.