Skip to content

Randolph County Fire and EMS Frequencies

Randolph County in Illinois has 10 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Randolph County Fire and EMS Frequencies

Quick answer: Fire dispatch for Randolph County: Randolph County Fire 156.2400 MHz, narrow FM, 85.4 PL.

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Randolph County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Randolph County FireRandolph County Fire – Countywide Paging / Dispatch156.240085.4 PLFMNWQNY423
Randolph County FireRandolph County Fire – Paging – Links to Remote Towers (Ellis Grove)453.2000
In 458.2000
343 DPLFMNWQON422
Randolph County FireRemote Link to Perry County 911 Back Up PSAP (Sparta)453.6250FMNWPRH418

EMS Tactical

EMS Tactical frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
MedStar Ambulance (Sparta)MedStar Ambulance (Sparta) – Operations (Sparta)154.515088.5 PLFMNWPMN541
MedStar Ambulance (Sparta)MedStar Ambulance (Sparta) – Operations – New (Chester)154.8675
In 153.7400
FMNWPMN541

Hospitals & Medical

Hospitals & Medical frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chester Memorial HospitalPatient Reports155.3400167.9 PLFMNWRX750
Deaconess Red Bud Regional HospitalPatient Reports155.160082.5 PLFMNWSLU845
Deaconess Red Bud Regional HospitalPatient Reports155.340082.5 PLFMNWSLU845
Sparta Community HospitalPatient Reports155.160091.5 PLFMNKVA233
Sparta Community HospitalPatient Reports155.340091.5 PLFMNKVA233

Radio system sites in Randolph County

Program the control channel first; your scanner finds the voice channels from it.

Chester · STARCOM21 Statewide Illinois
RFSS 3 · Site 10 (hex A) · NAC 148
Control 851.85, 852.375, 852.9
Voice 851.325, 853.425, 857.8125
Menard CC - Chester · STARCOM21 Statewide Illinois
RFSS 3 · Site 25 (hex 19) · NAC 140
Control 857.2625, 858.2625, 859.2625, 860.2625
Evansville · STARCOM21 Statewide Illinois
RFSS 3 · Site 33 (hex 21)
Control 851.4125, 851.9375, 853.875
Voice 855.3675, 856.2125
Sparta · STARCOM21 Statewide Illinois
RFSS 3 · Site 49 (hex 31) · NAC 147
Control 852.85, 853.375
Voice 852.325, 859.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Randolph County

Common questions

What frequency does the fire department use in Randolph County?

Fire dispatch channels listed for Randolph County: Randolph County Fire 156.2400 MHz, narrow FM, 85.4 PL.

What scanner do I need to listen to fire and EMS in Randolph County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Randolph County?

For Randolph County, start with the Chester site of STARCOM21 Statewide Illinois. Its control channels are 851.85, 852.375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Randolph County fire and EMS frequencies encrypted?

None of the 10 conventional frequencies listed for Randolph County are marked encrypted.