Skip to content

Perry County Fire and EMS Frequencies

Perry County in Illinois has 10 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Perry County Fire and EMS Frequencies

Quick answer: Fire dispatch for Perry County: Perry County Fire 153.7700 MHz, narrow FM, 85.4 PL. EMS dispatch for Perry County: Perry County EMS 155.4000 MHz, narrow FM, 85.4 PL.

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Perry County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Perry County FirePerry County Fire – Paging153.770085.4 PLFMNWPKJ493
Perry County Fire911 – DuQuoin Fire154.130085.4 PLFMNWPKJ493
Perry County Fire911 – Future159.3300FMNWPQJ331
Perry County Fire911 Remote Link – Pinckneyville FX2453.4250223 DPLFMNWPRH418
Perry County Fire911 Remote Link – Cutler FX0458.6250131.8 PLFMNWPRH418

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Illinois State Fairgrounds (DuQuoin)Fire Marshal158.7750
In 155.9850
FMNWPDP735
Perry County FirePerry County Fire – Local154.0700FMNWPRS328

EMS Dispatch

EMS Dispatch frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Perry County EMS911 – EMS Paging155.400085.4 PLFMNWPRS328

Hospitals & Medical

Hospitals & Medical frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marshall Browning Hospital (Pinckneyville)Patient Reports155.3400FMNWQIQ943
Pinckneyville Community HospitalPatient Reports155.3400100.0 PLFMNKNBW727

Radio system sites in Perry County

Program the control channel first; your scanner finds the voice channels from it.

DuQuoin · STARCOM21 Statewide Illinois
RFSS 3 · Site 18 (hex 12) · NAC 140
Control 852.4375, 852.9625
Voice 851.9125, 855.3625, 858.9125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Perry County

Common questions

What frequency does the fire department use in Perry County?

Fire dispatch channels listed for Perry County: Perry County Fire 153.7700 MHz, narrow FM, 85.4 PL.

What frequency does EMS or the ambulance service use in Perry County?

EMS dispatch channels listed for Perry County: Perry County EMS 155.4000 MHz, narrow FM, 85.4 PL.

What scanner do I need to listen to fire and EMS in Perry County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Perry County?

For Perry County, start with the DuQuoin site of STARCOM21 Statewide Illinois. Its control channels are 852.4375, 852.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Perry County fire and EMS frequencies encrypted?

None of the 10 conventional frequencies listed for Perry County are marked encrypted.