Skip to content

Menard County Fire and EMS Frequencies

Menard County in Illinois has 11 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Menard County Fire and EMS Frequencies

Quick answer: Fire dispatch for Menard County: Athens-Fancy Prairie Fire Department 151.2200 MHz, narrow FM, 103.5 PL; Menard County Fire 151.1750 MHz, narrow FM, 503 DPL.

  • 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Menard County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Menard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Athens-Fancy Prairie Fire DepartmentAthens-Fancy Prairie Fire Department – Dispatch151.2200
In 159.4500
103.5 PLFMNWRUK220
Menard County FireMenard County Fire – Tone-Outs / Dispatch151.1750
In 154.7700
503 DPLFMNWQPW824
Menard County FireMenard County Fire – 911 Tx input to 151.175154.7700251 DPLFMNWQPW824
Menard County FireMenard County Fire – 911 Tx input to 151.175154.7700271 DPLFMNWQPW824
Menard County Fire911 – Remote Link – Petersburg (poss. 156.7)453.5500FMNWQFZ345
Menard County Fire911 – Remote Link – Petersburg453.8000FMNWQFZ345
Menard County Fire911 – Remote Link – Oakland458.3000FMNWQFZ345
Menard County Fire911 – Remote Link – Oakland458.5250343 DPLFMNWQFZ345

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Menard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Menard County FireESDA/Rescue Squad45.5600FMNWQBD562
Menard County FireMenard County Fire – Operations155.8050
In 153.8450
103.5 PLFMNWQBD562
Menard County FireMenard County Fire – Operations156.1650
In 154.0775
506 DPLFMNWQPW824

Radio system sites in Menard County

Program the control channel first; your scanner finds the voice channels from it.

Atterberry · STARCOM21 Statewide Illinois
RFSS 2 · Site 32 (hex 20) · NAC 147
Control 851.95, 852.475, 853.3125
Voice 851.425, 853.8875, 859.3625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Menard County

Common questions

What frequency does the fire department use in Menard County?

Fire dispatch channels listed for Menard County: Athens-Fancy Prairie Fire Department 151.2200 MHz, narrow FM, 103.5 PL; Menard County Fire 151.1750 MHz, narrow FM, 503 DPL.

What scanner do I need to listen to fire and EMS in Menard County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Menard County?

For Menard County, start with the Atterberry site of STARCOM21 Statewide Illinois. Its control channels are 851.95, 852.475, 853.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Menard County fire and EMS frequencies encrypted?

None of the 11 conventional frequencies listed for Menard County are marked encrypted.