About Greenview Fire and EMS Frequencies
Quick answer: Fire dispatch for Greenview: Greenview Fire 153.0050 MHz, narrow FM, no tone.
- 13 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Greenview conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greenview Fire | Greenview Fire – Dispatch – New | 153.0050 In 158.3475 | FMN | WQYV760 | |
| Greenview Fire | Greenview Fire – Dispatch (via Phone, 118.8 or 156.7 ?) | 154.3400 | FMN | KZX272 |
Menard County channels that also cover Greenview
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Athens-Fancy Prairie Fire Department | Athens-Fancy Prairie Fire Department – Dispatch | 151.2200 In 159.4500 | 103.5 PL | FMN | WRUK220 |
| Menard County Fire | Menard County Fire – Tone-Outs / Dispatch | 151.1750 In 154.7700 | 503 DPL | FMN | WQPW824 |
| Menard County Fire | Menard County Fire – 911 Tx input to 151.175 | 154.7700 | 251 DPL | FMN | WQPW824 |
| Menard County Fire | Menard County Fire – 911 Tx input to 151.175 | 154.7700 | 271 DPL | FMN | WQPW824 |
| Menard County Fire | 911 – Remote Link – Petersburg (poss. 156.7) | 453.5500 | FMN | WQFZ345 | |
| Menard County Fire | 911 – Remote Link – Petersburg | 453.8000 | FMN | WQFZ345 | |
| Menard County Fire | 911 – Remote Link – Oakland | 458.3000 | FMN | WQFZ345 | |
| Menard County Fire | 911 – Remote Link – Oakland | 458.5250 | 343 DPL | FMN | WQFZ345 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Menard County Fire | ESDA/Rescue Squad | 45.5600 | FMN | WQBD562 | |
| Menard County Fire | Menard County Fire – Operations | 155.8050 In 153.8450 | 103.5 PL | FMN | WQBD562 |
| Menard County Fire | Menard County Fire – Operations | 156.1650 In 154.0775 | 506 DPL | FMN | WQPW824 |
Nearest trunked radio sites
Distances are measured from the center of Greenview.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Greenview?
Fire dispatch channels listed for Greenview: Greenview Fire 153.0050 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Greenview?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Greenview?
For Greenview, start with the Atterberry site of STARCOM21 Statewide Illinois. Its control channels are 851.95, 852.475, 853.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Greenview fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Greenview are marked encrypted.