About Brookport Fire and EMS Frequencies
Quick answer: Fire dispatch for Brookport: Brookport Fire 154.1675 MHz, narrow FM, 155 DPL. County-level ems dispatch that covers Brookport: Massac County EMS 155.2200 MHz, narrow FM, 132 DPL; Massac Memorial Hospital (Metropolis) 155.2200 MHz, narrow FM, 132 DPL.
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Brookport conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brookport Fire | Brookport Fire – Dispatch | 154.1675 In 159.3375 | 155 DPL | FMN | WRJH979 |
| Brookport Fire | Brookport Fire – Dispatch | 154.1675 In 159.3375 | CC 1 · TG 1 · SL 1 | DMR | WRJH979 |
Massac County channels that also cover Brookport
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Massac County Fire | Massac County Fire – Countywide Dispatch | 154.3400 In 151.1575 | 031 DPL | FMN | WRYG410 |
| Massac County Fire | Massac County Fire – Dispatch | 154.7475 In 158.8575 | DMR | WRYG410 | |
| Massac County Fire | Massac County Fire – Dispatch (Metropolis Tower) | 155.8650 In 159.3150 | CC 1 · TG * · SL 1 | DMR | WRYG410 |
| Massac County Fire | Massac County Fire – Remote Link (Metropolis) | 460.6250 | FMN | WRYG410 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Massac County Fire | Massac County Fire – Countywide Talk-Around | 153.8300 | 91.5 PL | FMN | WRXQ425 |
| Massac County Fire | Massac County Fire – Dispatch – Joppa / ESDA | 154.8150 In 151.2125 | 132 DPL | FMN | WRZD930 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Massac County EMS | Massac County EMS – Dispatch | 155.2200 | 132 DPL | FMN | WQCE455 |
| Massac Memorial Hospital (Metropolis) | Massac Memorial Hospital (Metropolis) – Massac Paging/Dispatch | 155.2200 | 132 DPL | FMN | WQCE455 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Massac Memorial Hospital (Metropolis) | Patient Reports (was 162.2) | 155.3400 | 210.7 PL | FMN | WQCE455 |
Nearest trunked radio sites
Distances are measured from the center of Brookport.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Brookport?
Fire dispatch channels listed for Brookport: Brookport Fire 154.1675 MHz, narrow FM, 155 DPL.
What frequency does EMS or the ambulance service use in Brookport?
We do not have a EMS dispatch channel listed specifically for Brookport. The county-level EMS dispatch channels in the same county: Massac County EMS 155.2200 MHz, narrow FM, 132 DPL; Massac Memorial Hospital (Metropolis) 155.2200 MHz, narrow FM, 132 DPL.
What scanner do I need to listen to fire and EMS in Brookport?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Brookport?
For Brookport, start with the Metropolis site of STARCOM21 Statewide Illinois. Its control channels are 852.325, 852.85 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Brookport fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Brookport are marked encrypted.