Skip to content

Belknap Fire and EMS Frequencies

We do not have frequencies listed specifically for Belknap in Johnson County, Illinois yet. Countywide channels for Johnson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Cypress (STARCOM21 Statewide Illinois), about 3 miles away.

About Belknap Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Belknap: Johnson County Fire 151.0625 MHz, narrow FM, 136.5 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Johnson County channels that also cover Belknap

Fire Dispatch

Fire Dispatch frequencies for Johnson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Johnson County FireJohnson County Fire – Dispatch151.0625
In 159.3600
136.5 PLFMNWPKN385
Johnson County FireFire Paging151.2350
In 153.8000
CC 1 · TG 1879 · SL 2DMRKNDU272

Nearest trunked radio sites

Distances are measured from the center of Belknap.

Cypress · STARCOM21 Statewide Illinois
RFSS 3 · Site 17 (hex 11) · NAC 147 · about 3 mi away
Control 851.9875, 852.825, 853.925
Voice 851.4625
Vienna · STARCOM21 Statewide Illinois
RFSS 3 · Site 21 (hex 15) · NAC 146 · about 10 mi away
Control 772.54375, 773.79375
Voice 769.46875
Goreville Omnipoint · STARCOM21 Statewide Illinois
RFSS 3 · Site 34 (hex 22) · NAC 142 · about 15 mi away
Control 769.19375, 773.54375, 774.21875
Voice 770.68675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Belknap?

We do not have a fire dispatch channel listed specifically for Belknap. The county-level fire dispatch channels in the same county: Johnson County Fire 151.0625 MHz, narrow FM, 136.5 PL.

What scanner do I need to listen to fire and EMS in Belknap?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Belknap?

For Belknap, start with the Cypress site of STARCOM21 Statewide Illinois. Its control channels are 851.9875, 852.825, 853.925 MHz. Program a control channel first; the scanner finds the voice channels from it.