About Hancock County Police Frequencies
Quick answer: Dispatch for Hancock County: Hancock County Sheriff 151.1825 MHz, narrow FM, no tone. Trunked: STARCOM21 Statewide Illinois, for example Hancock County Sheriff talkgroup 6056 (hex 17a8).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: STARCOM21 Statewide Illinois: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hancock County, start with the Niota site of STARCOM21 Statewide Illinois. Its control channels: 851.9, 852.425, 852.95 MHz.
Data updated .
Hancock County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hancock County Sheriff | Mobile Extenders | 151.1825 | FMN | WYC780 | |
| Hancock County Sheriff | Mobile Extenders | 151.3325 | 131.8 PL | FMN | WYC780 |
| Hancock County Sheriff | Hancock County Sheriff – Dispatch (Nauvoo) | 155.4150 In 158.9700 | 162.2 PL | FMN | WYC780 |
| Hancock County Sheriff | Hancock County Sheriff – Dispatch (Warsaw) | 155.4150 In 158.9700 | 162.2 PL | FMN | WYC780 |
Hancock County trunked talkgroups
STARCOM21 Statewide Illinois
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hancock County Sheriff | Hancock County Sheriff – Dispatch (along with VHF) | 6056 | 17a8 | D |
| Hancock County Sheriff | Operations | 6058 | 17aa | D |
Radio system sites in Hancock County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Hancock County
Common questions
What frequency do the police use in Hancock County?
Dispatch channels listed for Hancock County: Hancock County Sheriff 151.1825 MHz, narrow FM, no tone.
What is the sheriff's dispatch frequency in Hancock County?
Hancock County Sheriff 151.1825 MHz, narrow FM, no tone.
Do the police use a trunked radio system in Hancock County?
Yes. Law-enforcement talkgroups are listed for STARCOM21 Statewide Illinois: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Hancock County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hancock County?
For Hancock County, start with the Niota site of STARCOM21 Statewide Illinois. Its control channels are 851.9, 852.425, 852.95 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hancock County police frequencies encrypted?
None of the 4 conventional frequencies listed for Hancock County are marked encrypted.
Are Hancock County police talkgroups encrypted?
None of the 2 talkgroups listed for Hancock County are marked encrypted.