Skip to content

Hancock County Fire and EMS Frequencies

Hancock County in Illinois has 7 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 33 cities and communities below for local fire departments and EMS agencies.

About Hancock County Fire and EMS Frequencies

Quick answer: Fire dispatch for Hancock County: Hancock County Fire 154.3850 MHz, narrow FM, 103.5 PL. EMS dispatch for Hancock County: Hancock County EMS 158.9700 MHz, narrow FM, 173.8 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Hancock County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireHancock County Fire – Tone-Outs/Dispatch154.3850103.5 PLFMNWQAK851
Hancock County FireHancock County Fire – Tone-Outs/Dispatch154.3850118.8 PLFMNWQAK851
Hancock County FireHancock County Fire – Tone-Outs/Dispatch154.3850CSQFMNWQAK851
Hancock County FireHancock County Fire – Tone-Outs/Dispatch154.3850100.0 PLFMNWQAK851
Hancock County FireHancock County Fire – Tone-Outs/Dispatch154.3850127.3 PLFMNWQAK851

EMS Dispatch

EMS Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County EMSHancock County EMS – Dispatch (by Sheriff)158.9700173.8 PLFMNWYC790

Hospitals & Medical

Hospitals & Medical frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Memorial Hospital (Carthage)Patient Reports155.340091.5 PLFMNKSL965

Radio system sites in Hancock County

Program the control channel first; your scanner finds the voice channels from it.

Niota · STARCOM21 Statewide Illinois
RFSS 2 · Site 10 (hex A) · NAC 143
Control 851.9, 852.425, 852.95
Voice 851.375, 852.475, 853.475, 855.2125, 856.7875
Warsaw · STARCOM21 Statewide Illinois
RFSS 2 · Site 25 (hex 19) · NAC 144
Control 852.35, 852.875, 853.4
Voice 851.825, 853.9, 853.975, 854.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Hancock County

Common questions

What frequency does the fire department use in Hancock County?

Fire dispatch channels listed for Hancock County: Hancock County Fire 154.3850 MHz, narrow FM, 103.5 PL.

What frequency does EMS or the ambulance service use in Hancock County?

EMS dispatch channels listed for Hancock County: Hancock County EMS 158.9700 MHz, narrow FM, 173.8 PL.

What scanner do I need to listen to fire and EMS in Hancock County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Hancock County?

For Hancock County, start with the Niota site of STARCOM21 Statewide Illinois. Its control channels are 851.9, 852.425, 852.95 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hancock County fire and EMS frequencies encrypted?

None of the 7 conventional frequencies listed for Hancock County are marked encrypted.