Skip to content

Grayville Fire and EMS Frequencies

We do not have frequencies listed specifically for Grayville in Edwards County, Illinois yet. Countywide channels for Edwards County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Phillipstown (STARCOM21 Statewide Illinois), about 8 miles away.

Grayville also extends into White County.

About Grayville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Grayville: Edwards County Fire 154.4300 MHz, narrow FM, 118.8 PL. County-level ems dispatch that covers Grayville: Edwards County EMS 155.2200 MHz, narrow FM, no tone.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Edwards County channels that also cover Grayville

Fire Dispatch

Fire Dispatch frequencies for Edwards County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Edwards County FireEdwards County Fire – Dispatch – Countywide – Albion, Browns, Bone Gap154.4300118.8 PLFMNWQQL281

EMS Dispatch

EMS Dispatch frequencies for Edwards County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Edwards County EMSEdwards County EMS – Dispatch (Albion/WPXC678 W Salem)155.2200FMNWQDN356
Edwards County EMSEdwards County EMS – Dispatch (W Salem)155.8800
In 158.9400
162 DPLFMNWQHA843

Nearest trunked radio sites

Distances are measured from the center of Grayville.

Phillipstown · STARCOM21 Statewide Illinois
RFSS 3 · Site 40 (hex 28) · NAC 141 · about 8 mi away
Control 852.325, 852.85, 853.375
Voice 851.4875, 853.95
Mt. Carmel · STARCOM21 Statewide Illinois
RFSS 3 · Site 3 (hex 3) · NAC 14B · about 16 mi away
Control 852.375, 852.9
Voice 851.85, 857.8875
Carmi · STARCOM21 Statewide Illinois
RFSS 3 · Site 8 (hex 8) · NAC 14A · about 16 mi away
Control 851.875, 852.4, 852.925
Voice 851.35, 853.45
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Grayville?

We do not have a fire dispatch channel listed specifically for Grayville. The county-level fire dispatch channels in the same county: Edwards County Fire 154.4300 MHz, narrow FM, 118.8 PL.

What frequency does EMS or the ambulance service use in Grayville?

We do not have a EMS dispatch channel listed specifically for Grayville. The county-level EMS dispatch channels in the same county: Edwards County EMS 155.2200 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Grayville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Grayville?

For Grayville, start with the Phillipstown site of STARCOM21 Statewide Illinois. Its control channels are 852.325, 852.85, 853.375 MHz. Program a control channel first; the scanner finds the voice channels from it.