Skip to content

White County Fire and EMS Frequencies

White County in Illinois has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 15 cities and communities below for local fire departments and EMS agencies.

About White County Fire and EMS Frequencies

Quick answer: Fire dispatch for White County: White County Fire 151.4000 MHz, narrow FM, 162.2 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

White County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for White County
AgencyDescriptionFrequency (MHz)ToneModeFCC
White County FireWhite County Fire – Dispatch (Norris City)151.4000
In 155.8800
162.2 PLFMNWNDR580
White County FireWhite County Fire – Dispatch (Carmi)159.0000
In 156.0150
88.5 PLFMNWQTU971

Radio system sites in White County

Program the control channel first; your scanner finds the voice channels from it.

Carmi · STARCOM21 Statewide Illinois
RFSS 3 · Site 8 (hex 8) · NAC 14A
Control 851.875, 852.4, 852.925
Voice 851.35, 853.45
Herald · STARCOM21 Statewide Illinois
RFSS 3 · Site 35 (hex 23) · NAC 14F
Control 774.28125, 775.30625
Voice 770.95625, 773.29375, 773.56875, 774.29375, 774.53125
Phillipstown · STARCOM21 Statewide Illinois
RFSS 3 · Site 40 (hex 28) · NAC 141
Control 852.325, 852.85, 853.375
Voice 851.4875, 853.95
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in White County

Common questions

What frequency does the fire department use in White County?

Fire dispatch channels listed for White County: White County Fire 151.4000 MHz, narrow FM, 162.2 PL.

What scanner do I need to listen to fire and EMS in White County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in White County?

For White County, start with the Carmi site of STARCOM21 Statewide Illinois. Its control channels are 851.875, 852.4, 852.925 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are White County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for White County are marked encrypted.