Skip to content

Greene County Fire and EMS Frequencies

Greene County in Georgia has 6 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Greene County Fire and EMS Frequencies

Quick answer: Fire dispatch for Greene County: Greene County Fire 155.1750 MHz, narrow FM, 94.8 PL. EMS dispatch for Greene County: Greene County EMS 155.8800 MHz, narrow FM, no tone. Trunked: Oconee Areawide Radio System (OARS), for example Greene County Fire talkgroup 36030 (hex 8cbe).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oconee Areawide Radio System (OARS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Greene County, start with the Greene/Oconee Co. Simulcast site of Oconee Areawide Radio System (OARS). Its control channels: 769.83125, 770.00625, 771.03125 MHz.
  • 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Greene County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Greene County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Greene County FireFire/EMS Simulcast155.175094.8 PLFMNWNGM838

Fire Talk-around

Fire Talk-around frequencies for Greene County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Greene County FireGreene County Fire – Alternate154.0100FMNKXB544
Greene County Fire Expired: Expired 8/21Fire Association154.2350FMNWNWZ211
Greene County FireGreene County Fire – Alternate154.3250FMNKXB544

EMS Dispatch

EMS Dispatch frequencies for Greene County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Greene County EMSGreene County EMS – Dispatch155.8800
In 155.0250
FMNKNID726

EMS Talk-around

EMS Talk-around frequencies for Greene County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Greene County EMSGreene County EMS – Alternate155.1750FMNWNGM838

Greene County trunked talkgroups

Oconee Areawide Radio System (OARS)

Oconee Areawide Radio System (OARS) talkgroups
AgencyDescriptionTalkgroupHexMode
Greene County FireGreene County Fire – Dispatch360308cbeD
3 encrypted talkgroups (cannot be monitored)
Oconee Areawide Radio System (OARS) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Greene County FireGreene County Fire – Tactical Channel360318cbfD Encrypted
Greene County EMSGreene County EMS – Dispatch360408cc8D Encrypted
Greene County EMSEMS-to-Hospital360428ccaD Encrypted

Radio system sites in Greene County

Program the control channel first; your scanner finds the voice channels from it.

Greene/Oconee Co. Simulcast · Oconee Areawide Radio System (OARS)
RFSS 7 · Site 2 (hex 2) · NAC 290
Control 769.83125, 770.00625, 771.03125
Voice 770.33125, 771.18125, 771.65625, 771.75625, 771.95625, 772.35625, 774.43125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Greene County

Common questions

What frequency does the fire department use in Greene County?

Fire dispatch channels listed for Greene County: Greene County Fire 155.1750 MHz, narrow FM, 94.8 PL.

What frequency does EMS or the ambulance service use in Greene County?

EMS dispatch channels listed for Greene County: Greene County EMS 155.8800 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Greene County?

Yes. Fire and EMS talkgroups are listed for Oconee Areawide Radio System (OARS): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Greene County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Greene County?

For Greene County, start with the Greene/Oconee Co. Simulcast site of Oconee Areawide Radio System (OARS). Its control channels are 769.83125, 770.00625, 771.03125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Greene County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Greene County are marked encrypted.

Are Greene County fire and EMS talkgroups encrypted?

3 of the 4 talkgroups listed for Greene County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.