Skip to content

Prowers County Fire and EMS Frequencies

Prowers County in Colorado has 1 countywide conventional frequency and 2 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Prowers County Fire and EMS Frequencies

Quick answer: Fire dispatch for Prowers County: Prowers County Fire 154.3700 MHz, narrow FM, 186.2 PL. Trunked: State of Colorado DTRS, for example Prowers County Fire talkgroup 303 (hex 12f).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Prowers County, start with the Lamar site of State of Colorado DTRS. Its control channels: 852.1, 852.6, 852.9375 MHz.

Data updated .

Prowers County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Prowers County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prowers County FireProwers County Rural Fire Department154.3700
In 153.8300
186.2 PLFMNWPJM543

Prowers County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Prowers County FireProwers County Fire – Fire Ground30312fD
Prowers County FireProwers County Fire – Fire Ground304130D

Radio system sites in Prowers County

Program the control channel first; your scanner finds the voice channels from it.

Lamar · State of Colorado DTRS
RFSS 6 · Site 18 (hex 12) · NAC D12
Control 852.1, 852.6, 852.9375, 853.2375
Voice 851.7875, 855.2375, 856.5875
Carlton · State of Colorado DTRS
RFSS 6 · Site 29 (hex 1D) · NAC D1D
Control 851.4, 852.2, 852.4125, 853.0625
Voice 851.0375, 856.5375
Holly · State of Colorado DTRS
RFSS 6 · Site 44 (hex 2C) · NAC D1C
Control 851.6375, 851.8, 853.4125, 853.775
Voice 851.125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Prowers County

Common questions

What frequency does the fire department use in Prowers County?

Fire dispatch channels listed for Prowers County: Prowers County Fire 154.3700 MHz, narrow FM, 186.2 PL.

Do fire departments and EMS use a trunked radio system in Prowers County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Prowers County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Prowers County?

For Prowers County, start with the Lamar site of State of Colorado DTRS. Its control channels are 852.1, 852.6, 852.9375, 853.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Prowers County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Prowers County are marked encrypted.

Are Prowers County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Prowers County are marked encrypted.