About Wiley Fire and EMS Frequencies
Quick answer: Fire dispatch for Wiley: Wiley Fire 154.4300 MHz, narrow FM, 88.5 PL. Trunked: State of Colorado DTRS, for example Wiley Fire talkgroup 305 (hex 131).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 2 talkgroups; State of Colorado DTRS: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wiley, start with the Lamar site of State of Colorado DTRS, about 8 miles away. Its control channels: 852.1, 852.6, 852.9375 MHz.
Data updated .
Wiley conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wiley Fire | Wiley Fire – Dispatch | 154.4300 In 153.8900 | 88.5 PL | FMN | WPJH897 |
Wiley trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wiley Fire | Wiley Fire – Dispatch | 305 | 131 | D |
| Wiley Fire | Wiley Fire – Tactical Channel | 306 | 132 | D |
Prowers County channels that also cover Wiley
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Prowers County Fire | Prowers County Rural Fire Department | 154.3700 In 153.8300 | 186.2 PL | FMN | WPJM543 |
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Prowers County Fire | Prowers County Fire – Fire Ground | 303 | 12f | D |
| Prowers County Fire | Prowers County Fire – Fire Ground | 304 | 130 | D |
Nearest trunked radio sites
Distances are measured from the center of Wiley.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Wiley?
Fire dispatch channels listed for Wiley: Wiley Fire 154.4300 MHz, narrow FM, 88.5 PL.
Do fire departments and EMS use a trunked radio system in Wiley?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Wiley?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Wiley?
For Wiley, start with the Lamar site of State of Colorado DTRS. Its control channels are 852.1, 852.6, 852.9375, 853.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Wiley fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Wiley are marked encrypted.
Are Wiley fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Wiley are marked encrypted.