Skip to content

Phillips County Police Frequencies

Phillips County in Colorado has 1 countywide conventional frequency and 3 countywide talkgroups in our database. Use the list of 4 cities and communities below for local police departments.

About Phillips County Police Frequencies

Quick answer: Dispatch for Phillips County: Phillips County Sheriff 155.6850 MHz, narrow FM, 156.7 PL. Trunked: State of Colorado DTRS, for example Phillips County Sheriff talkgroup 9009 (hex 2331).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: State of Colorado DTRS: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Phillips County, start with the Phillips site of State of Colorado DTRS. Its control channels: 852.95, 853.1625, 853.45 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Phillips County conventional frequencies

Dispatch

Dispatch frequencies for Phillips County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Phillips County SheriffPhillips County Sheriff – Dispatch155.6850
In 158.9700
156.7 PLFMNWNKS890

Phillips County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Phillips County SheriffSheriff 290092331D
Phillips County SheriffSheriff 390102332D
1 encrypted talkgroup (cannot be monitored)
State of Colorado DTRS encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Phillips County SheriffSheriff 190082330D Encrypted

Radio system sites in Phillips County

Program the control channel first; your scanner finds the voice channels from it.

Phillips · State of Colorado DTRS
RFSS 3 · Site 53 (hex 35) · NAC D16
Control 852.95, 853.1625, 853.45, 853.975
Voice 852.45, 858.5375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Phillips County

Common questions

What frequency do the police use in Phillips County?

Dispatch channels listed for Phillips County: Phillips County Sheriff 155.6850 MHz, narrow FM, 156.7 PL.

What is the sheriff's dispatch frequency in Phillips County?

Phillips County Sheriff 155.6850 MHz, narrow FM, 156.7 PL.

Do the police use a trunked radio system in Phillips County?

Yes. Law-enforcement talkgroups are listed for State of Colorado DTRS: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Phillips County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Phillips County?

For Phillips County, start with the Phillips site of State of Colorado DTRS. Its control channels are 852.95, 853.1625, 853.45, 853.975 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Phillips County police frequencies encrypted?

None of the 1 conventional frequencies listed for Phillips County are marked encrypted.

Are Phillips County police talkgroups encrypted?

1 of the 3 talkgroups listed for Phillips County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.