Skip to content

Phillips County Fire and EMS Frequencies

Phillips County in Colorado has 0 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Phillips County Fire and EMS Frequencies

We don't have any verified fire and EMS frequencies for Phillips County yet, but we're working on adding some.

If you know of any, or spot something wrong on a nearby page, please send it to contact@scanner-frequencies.com and we'll check it against the official records.

Radio system sites in Phillips County

Program the control channel first; your scanner finds the voice channels from it.

Phillips · State of Colorado DTRS
RFSS 3 · Site 53 (hex 35) · NAC D16
Control 852.95, 853.1625, 853.45, 853.975
Voice 852.45, 858.5375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Phillips County

Common questions

What are the control channels for trunked radio in Phillips County?

For Phillips County, start with the Phillips site of State of Colorado DTRS. Its control channels are 852.95, 853.1625, 853.45, 853.975 MHz. Program a control channel first; the scanner finds the voice channels from it.