Skip to content

Jackson County Fire and EMS Frequencies

Jackson County in Colorado has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 1 city and community below for local fire departments and EMS agencies.

About Jackson County Fire and EMS Frequencies

Quick answer: Fire dispatch for Jackson County: Jackson County Fire 154.1300 MHz, narrow FM, 103.5 PL. EMS dispatch for Jackson County: Jackson County EMS 155.3400 MHz, narrow FM, 118.8 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Jackson County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County FireJackson County Fire – Dispatch154.1300103.5 PLFMN—

EMS Dispatch

EMS Dispatch frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County EMSJackson County EMS – Dispatch155.3400118.8 PLFMN—

Radio system sites in Jackson County

Program the control channel first; your scanner finds the voice channels from it.

Walden Air (Aircraft Only) · State of Colorado DTRS
RFSS 2 · Site 5 (hex 5) · NAC D15
Control 774.33125, 774.58125, 774.83125
Voice 774.08125
Walden · State of Colorado DTRS
RFSS 2 · Site 15 (hex F) · NAC D1F
Control 851.3625, 851.5625, 851.8875, 852.125
Voice 851.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Jackson County

Common questions

What frequency does the fire department use in Jackson County?

Fire dispatch channels listed for Jackson County: Jackson County Fire 154.1300 MHz, narrow FM, 103.5 PL.

What frequency does EMS or the ambulance service use in Jackson County?

EMS dispatch channels listed for Jackson County: Jackson County EMS 155.3400 MHz, narrow FM, 118.8 PL.

What scanner do I need to listen to fire and EMS in Jackson County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Jackson County?

For Jackson County, start with the Walden Air (Aircraft Only) site of State of Colorado DTRS. Its control channels are 774.33125, 774.58125, 774.83125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Jackson County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Jackson County are marked encrypted.