About Walden Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Walden: Jackson County Fire 154.1300 MHz, narrow FM, 103.5 PL. County-level ems dispatch that covers Walden: Jackson County EMS 155.3400 MHz, narrow FM, 118.8 PL. Trunked: State of Colorado DTRS, for example Walden Hospital talkgroup 175 (hex af).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Walden, start with the Walden site of State of Colorado DTRS, about 0 miles away. Its control channels: 851.3625, 851.5625, 851.8875 MHz.
Data updated .
Walden trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Walden Hospital | North Park Medical Center | 175 | af | D |
Jackson County channels that also cover Walden
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County Fire | Jackson County Fire – Dispatch | 154.1300 | 103.5 PL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County EMS | Jackson County EMS – Dispatch | 155.3400 | 118.8 PL | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Walden.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Walden?
We do not have a fire dispatch channel listed specifically for Walden. The county-level fire dispatch channels in the same county: Jackson County Fire 154.1300 MHz, narrow FM, 103.5 PL.
What frequency does EMS or the ambulance service use in Walden?
We do not have a EMS dispatch channel listed specifically for Walden. The county-level EMS dispatch channels in the same county: Jackson County EMS 155.3400 MHz, narrow FM, 118.8 PL.
Do fire departments and EMS use a trunked radio system in Walden?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Walden?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Walden?
For Walden, start with the Walden site of State of Colorado DTRS. Its control channels are 851.3625, 851.5625, 851.8875, 852.125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Walden fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Walden are marked encrypted.