About Custer County Fire and EMS Frequencies
Quick answer: Fire dispatch for Custer County: Custer County Fire 154.3850 MHz, FM, 110.9 PL. Trunked: State of Colorado DTRS, for example Custer County Fire talkgroup 449 (hex 1c1).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Custer County, start with the Verdemont site of State of Colorado DTRS. Its control channels: 852.9, 853.1125, 853.4 MHz.
Data updated .
Custer County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Custer County Fire | Wet Mountain Fire Protection Dist. | 154.3850 In 153.7700 | 110.9 PL | FM | WPKH611 |
Custer County trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Custer County Fire | Wet Mountain Fire District | 449 | 1c1 | D |
| Custer County Fire | Wetmore Fire District | 450 | 1c2 | D |
| Custer County Fire | County Fire Fireground | 447 | 1bf | D |
| Custer County Fire | County Fire | 451 | 1c3 | D |
| Custer County Fire | Wet Mountain Fire District Tactical | 456 | 1c8 | D |
| Custer County EMS | County EMS | 446 | 1be | D |
| Custer County EMS | County EMS | 448 | 1c0 | D |
Radio system sites in Custer County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Custer County
Common questions
What frequency does the fire department use in Custer County?
Fire dispatch channels listed for Custer County: Custer County Fire 154.3850 MHz, FM, 110.9 PL.
Do fire departments and EMS use a trunked radio system in Custer County?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Custer County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Custer County?
For Custer County, start with the Verdemont site of State of Colorado DTRS. Its control channels are 852.9, 853.1125, 853.4, 853.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Custer County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Custer County are marked encrypted.
Are Custer County fire and EMS talkgroups encrypted?
None of the 7 talkgroups listed for Custer County are marked encrypted.