Skip to content

Sidney Fire and EMS Frequencies

We do not have frequencies listed specifically for Sidney in Sharp County, Arkansas yet. Countywide channels for Sharp County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Iron Mountain (Arkansas Wireless Information Network (AWIN)), about 22 miles away.

About Sidney Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Sidney: Sharp County Fire 155.9250 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Sidney: Sharp County EMS 155.9250 MHz, narrow FM, no tone.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Sharp County channels that also cover Sidney

Fire Dispatch

Fire Dispatch frequencies for Sharp County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sharp County FireSharp County Fire – Dispatch – Central155.9250
In 153.9950
141.3 PLFMNWNGG564
Sharp County FireSharp County Fire – Dispatch – North155.9250
In 153.9950
156.7 PLFMNWNGG564
Sharp County FireSharp County Fire – Dispatch – South155.9250
In 153.9950
127.3 PLFMNWNGG564
Sharp County FireHighland Village Fire/Rescue (Also licensed for NXDN)159.2025
In 153.8000
CSQFMNWQXY488

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sharp County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sharp County FireSharp County Fire – Operations (Digital)155.9250
In 153.9950
RAN 15NXDN48WNGG564

EMS Dispatch

EMS Dispatch frequencies for Sharp County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sharp County EMSSharp County EMS – Dispatch155.9250
In 153.9950
FMNWNGG564

Nearest trunked radio sites

Distances are measured from the center of Sidney.

Iron Mountain · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 48 (hex 30) · NAC 18F · about 22 mi away
Control 851.0625, 851.325
Voice 851.6, 852.45, 853.9375
Big Lick Hill (Ravenden) · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 49 (hex 31) · NAC 189 · about 24 mi away
Control 851.425, 851.875
Voice 852.15, 853.3625, 853.6125
Batesville · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 51 (hex 33) · NAC 183 · about 28 mi away
Control 851.4, 851.675
Voice 852.05, 853.2375, 853.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sidney?

We do not have a fire dispatch channel listed specifically for Sidney. The county-level fire dispatch channels in the same county: Sharp County Fire 155.9250 MHz, narrow FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Sidney?

We do not have a EMS dispatch channel listed specifically for Sidney. The county-level EMS dispatch channels in the same county: Sharp County EMS 155.9250 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Sidney?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Sidney?

For Sidney, start with the Iron Mountain site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.0625, 851.325 MHz. Program a control channel first; the scanner finds the voice channels from it.