Ash Flat also extends into Fulton County.
About Ash Flat Fire and EMS Frequencies
Quick answer: Fire dispatch for Ash Flat: Ash Flat Fire 154.1000 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Ash Flat: Sharp County EMS 155.9250 MHz, narrow FM, no tone.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Ash Flat conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ash Flat Fire | Ash Flat Fire – Dispatch | 154.1000 In 159.1800 | 141.3 PL | FMN | WPKG731 |
Sharp County channels that also cover Ash Flat
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sharp County Fire | Sharp County Fire – Dispatch – Central | 155.9250 In 153.9950 | 141.3 PL | FMN | WNGG564 |
| Sharp County Fire | Sharp County Fire – Dispatch – North | 155.9250 In 153.9950 | 156.7 PL | FMN | WNGG564 |
| Sharp County Fire | Sharp County Fire – Dispatch – South | 155.9250 In 153.9950 | 127.3 PL | FMN | WNGG564 |
| Sharp County Fire | Highland Village Fire/Rescue (Also licensed for NXDN) | 159.2025 In 153.8000 | CSQ | FMN | WQXY488 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sharp County Fire | Sharp County Fire – Operations (Digital) | 155.9250 In 153.9950 | RAN 15 | NXDN48 | WNGG564 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sharp County EMS | Sharp County EMS – Dispatch | 155.9250 In 153.9950 | FMN | WNGG564 |
Nearest trunked radio sites
Distances are measured from the center of Ash Flat.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Ash Flat?
Fire dispatch channels listed for Ash Flat: Ash Flat Fire 154.1000 MHz, narrow FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Ash Flat?
We do not have a EMS dispatch channel listed specifically for Ash Flat. The county-level EMS dispatch channels in the same county: Sharp County EMS 155.9250 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Ash Flat?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Ash Flat?
For Ash Flat, start with the Wallace Knob site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.225, 851.475 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Ash Flat fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Ash Flat are marked encrypted.