About Hempstead County Fire and EMS Frequencies
Quick answer: Fire dispatch for Hempstead County: Hempstead County Fire 154.3400 MHz, narrow FM, 151.4 PL. EMS dispatch for Hempstead County: LifeNet EMS 453.0750 MHz, narrow FM, no tone; Pafford Ambulance 151.4975 MHz, narrow FM, 136.5 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Hempstead County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hempstead County Fire | Hempstead County Fire – South | 154.3400 In 153.9500 | CC 1 · TG 703 · SL 1 | DMR Encrypted | WQBR277 |
| Hempstead County Fire | Hempstead County Fire – South | 154.3400 In 153.9500 | 151.4 PL | FMN | WQBR277 |
| Hempstead County Fire | Hempstead County Fire – North | 154.8000 In 159.2100 | CC 1 · TG 703 · SL 1 | DMR Encrypted | WNIG271 |
| Hempstead County Fire | Hempstead County Fire – North | 154.8000 In 159.2100 | 151.4 PL | FMN | WNIG271 |
| Hempstead County Fire | Hempstead County Fire – West | 155.5575 In 158.9325 | CC 3 · TG 722 · SL 1 | DMR Encrypted | WQQV430 |
| Hempstead County Fire | Hempstead County Fire – West | 155.5575 In 158.9325 | 151.4 PL | FMN | WQQV430 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| LifeNet EMS | LifeNet EMS – Operations | 453.0750 In 458.0750 | FMN | WPEK955 | |
| Pafford Ambulance | Pafford Ambulance – Dispatch-Primary | 151.4975 In 158.8275 | 136.5 PL | FMN | WQGF396 |
Radio system sites in Hempstead County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Hempstead County
Common questions
What frequency does the fire department use in Hempstead County?
Fire dispatch channels listed for Hempstead County: Hempstead County Fire 154.3400 MHz, narrow FM, 151.4 PL.
What frequency does EMS or the ambulance service use in Hempstead County?
EMS dispatch channels listed for Hempstead County: LifeNet EMS 453.0750 MHz, narrow FM, no tone; Pafford Ambulance 151.4975 MHz, narrow FM, 136.5 PL.
What scanner do I need to listen to fire and EMS in Hempstead County?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Hempstead County?
For Hempstead County, start with the Hope site of Arkansas Wireless Information Network (AWIN). Its control channels are 852.1, 852.6 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hempstead County fire and EMS frequencies encrypted?
3 of the 8 conventional frequencies listed for Hempstead County are marked encrypted; a scanner cannot decode encrypted audio.