About Fulton Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fulton: Hempstead County Fire 154.3400 MHz, narrow FM, 151.4 PL. County-level ems dispatch that covers Fulton: LifeNet EMS 453.0750 MHz, narrow FM, no tone; Pafford Ambulance 151.4975 MHz, narrow FM, 136.5 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Hempstead County channels that also cover Fulton
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hempstead County Fire | Hempstead County Fire – South | 154.3400 In 153.9500 | CC 1 · TG 703 · SL 1 | DMR Encrypted | WQBR277 |
| Hempstead County Fire | Hempstead County Fire – South | 154.3400 In 153.9500 | 151.4 PL | FMN | WQBR277 |
| Hempstead County Fire | Hempstead County Fire – North | 154.8000 In 159.2100 | CC 1 · TG 703 · SL 1 | DMR Encrypted | WNIG271 |
| Hempstead County Fire | Hempstead County Fire – North | 154.8000 In 159.2100 | 151.4 PL | FMN | WNIG271 |
| Hempstead County Fire | Hempstead County Fire – West | 155.5575 In 158.9325 | CC 3 · TG 722 · SL 1 | DMR Encrypted | WQQV430 |
| Hempstead County Fire | Hempstead County Fire – West | 155.5575 In 158.9325 | 151.4 PL | FMN | WQQV430 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| LifeNet EMS | LifeNet EMS – Operations | 453.0750 In 458.0750 | FMN | WPEK955 | |
| Pafford Ambulance | Pafford Ambulance – Dispatch-Primary | 151.4975 In 158.8275 | 136.5 PL | FMN | WQGF396 |
Nearest trunked radio sites
Distances are measured from the center of Fulton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fulton?
We do not have a fire dispatch channel listed specifically for Fulton. The county-level fire dispatch channels in the same county: Hempstead County Fire 154.3400 MHz, narrow FM, 151.4 PL.
What frequency does EMS or the ambulance service use in Fulton?
We do not have a EMS dispatch channel listed specifically for Fulton. The county-level EMS dispatch channels in the same county: LifeNet EMS 453.0750 MHz, narrow FM, no tone; Pafford Ambulance 151.4975 MHz, narrow FM, 136.5 PL.
What scanner do I need to listen to fire and EMS in Fulton?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Fulton?
For Fulton, start with the Hope site of Arkansas Wireless Information Network (AWIN). Its control channels are 852.1, 852.6 MHz. Program a control channel first; the scanner finds the voice channels from it.