Skip to content

Pine Hill Fire and EMS Frequencies

Pine Hill in Wilcox County, Alabama has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Evergreen (Fire Tower) (Alabama Interoperable Radio System (AIRS)), about 44 miles away.

About Pine Hill Fire and EMS Frequencies

Quick answer: Fire dispatch for Pine Hill: Pine Hill Fire 154.2500 MHz, narrow FM, no tone.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Pine Hill conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Pine Hill
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pine Hill FirePine Hill Fire – Dispatch154.2500FMNKNIU330

Wilcox County channels that also cover Pine Hill

Fire Dispatch

Fire Dispatch frequencies for Wilcox County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alabama Foresty Commission FireRural Fire Suppression453.2000
In 458.2000
FMNWNGC883

Hospitals & Medical

Hospitals & Medical frequencies for Wilcox County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilcox County HospitalJohn Paul Jones Hospital – Patient Reports155.3400167.9 PLFMNWQOK959

Nearest trunked radio sites

Distances are measured from the center of Pine Hill.

Evergreen (Fire Tower) · Alabama Interoperable Radio System (AIRS)
RFSS 2 · Site 15 (hex F) · NAC 46F · about 44 mi away
Control 771.93125
Voice 769.30625, 771.28125
Uriah · Alabama Interoperable Radio System (AIRS)
RFSS 2 · Site 8 (hex 8) · NAC 468 · about 46 mi away
Control 769.34375, 770.11875, 773.55625
Voice 769.09375, 773.05625, 773.30625
Belleville · Alabama Interoperable Radio System (AIRS)
RFSS 2 · Site 16 (hex 10) · NAC 468 · about 48 mi away
Control 771.71875
Voice 769.76875, 771.01875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pine Hill?

Fire dispatch channels listed for Pine Hill: Pine Hill Fire 154.2500 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Pine Hill?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Pine Hill?

For Pine Hill, start with the Evergreen (Fire Tower) site of Alabama Interoperable Radio System (AIRS). Its control channels are 771.93125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Pine Hill fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Pine Hill are marked encrypted.