About Alberta Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Alberta: Alabama Foresty Commission Fire 453.2000 MHz, narrow FM, no tone.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Wilcox County channels that also cover Alberta
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alabama Foresty Commission Fire | Rural Fire Suppression | 453.2000 In 458.2000 | FMN | WNGC883 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilcox County Hospital | John Paul Jones Hospital – Patient Reports | 155.3400 | 167.9 PL | FMN | WQOK959 |
Nearest trunked radio sites
Distances are measured from the center of Alberta.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Alberta?
We do not have a fire dispatch channel listed specifically for Alberta. The county-level fire dispatch channels in the same county: Alabama Foresty Commission Fire 453.2000 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Alberta?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Alberta?
For Alberta, start with the Evergreen (Fire Tower) site of Alabama Interoperable Radio System (AIRS). Its control channels are 771.93125 MHz. Program a control channel first; the scanner finds the voice channels from it.